Softener units that have two tanks for softening water. With these models, when one tank is in use, the other is regenerating so that you never run out of softened water. A dual- tank water softener doesn’t have to be necessarily larger than a single tank unit. Infect, some dual-tank water softener units are smaller than single-tank units.
Before buying a dual-tank water softener, look for NSF certification and warranty. A good softener should last at least 15 to 20 years. It also depends on how you use the unit and regular and proper maintenance.
What are the advantages and benefits of a dual-tank water softener?
A dual-tank water softener has some advantages over single-tank units. All water softeners are designed such that when it is recharging, it disconnect from the water system. With a single-tank water softener, you may have to set the regeneration cycle to occur at night.
If you have a large family or if you live in a place where water is particularly hard (over10 grains per gallon (GPG), may want to consider a unit with two resin tanks so that you never run out of soft water. With a dual-tank softer unit, you can set the regeneration cycle at any time.
Dual-Tank Water Softener Models
Several models of Dual-Tank Water Softener are available in the market. Fleck 9000 is a very popular product in this category. It has a fully adjustable valve controlled by a meter. When it starts backwashing one tank, it switches the water supply to the other tank, offering a continuous flow rate of around 21 gallons per minute. It also offers you different options with tank capacities. You can buy a tank with —24,000, 32,000, 40,000, 48,000, 64,000, 80,000, and 110,000 grain capacity per tank. Price range from $1,000 to $2,000.
Buying and installation of Dual-Tank Water Softener
When shopping for a dual-tank water softener, keep in mind the space it will require. A dual-tank water softener should always be installed at a place where it can serve the main inbound water line so it can serve the whole house. It also requires a drain for backwashing. If you are buying a model that requires electrical power, you will need a switch board where it has to be installed.
Before buying a dual-tank water softener, look for NSF certification and warranty on the control valve and mineral tank. A warranty of 3 years on the valve and 10 years for the mineral tank is good. A good softener should last at least 15 to 20 years. It also depends on how you use the unit and regular and proper maintenance.
- Tap Water Purifier for Home – Buying Guide and Review
- Water Softener Buying Guide and Review for Consumers
- How a Water Softener Works
- Hard Water Problems
- How to Know Hardness of Hard Water
- Water Filter Buying Guide and Review for Consumers
- How to Install Water Filter
- Salt Free Water Softener Review
- 10 Things Every Kitchen Should Have
- How to Solve Drinking Water Problem
- Selecting Water Softener Size
- Water Heater Buying Guide and Review for Consumers
- Whole House Tankless Water Heater Buying Guide and Review for Consumers
- How Solar Water Heater Works
- How to Drain a Water Heater
- Alkaline Ionized Water Benefits
- Instant Hot Water Dispenser Buying Guide & Review for Consumers